The Cotterman Maxi Lift line of push-around lifts sets the standard for quality and reliability. Only the finest components are used in the construction: powder coated steel, Haldex-Barnes hydraulics, Trojan DC batteries, Guest 10 AMP battery charger, and Colson phenolic casters. In addition, the current Maxi Lift design is the eighth generation model, after nearly twenty years of refining the unit for maximum stability, ease of use, and safety. Meets or exceeds all applicable standards, including ANSI A92.3-1990, plus proposed changes.
Manual Winch Elevating Work Platform
An economical alternative to electro-hydraulic lifts, the Cotterman Manual Winch lift is simple to use and maintain. The lift is quickly elevated to the desired working height with a hand crank winch, then the user climbs a ladder to the platform. Built in safety features include a friction brake on the winch and outriggers that can be placed in an X pattern or rectangular. In addition, in case the cable is cut or snaps, a spring loaded mechanical stop engages as soon as tension is released from the cable, preventing a vertical drop.
Outriggerless Pusharound Lift
New to The Maxi Lift product line is the revolutionary Outriggerless Push Around Lift. The design is unique in that the unit passes all current ANSI standards, plus the proposed changes to ANSI 92.3, which would require greater built-in stability to prevent tip over. The Outriggerless Maxi Lift accomplished this while holding a 30" width, allowing it to pass through standard doorways. In addition, even though the added weight in the base increases the overall weight, The MLN176BH is still lighter than the 25 Ft. model. Pair this feature with the front and back casters moved closer to one another for a smaller turning radius, and you have a surprisingly easy to maneuver lift. Platform height is seventeen feet, allowing most to work comfortably at 23 feet.
25 ft. Pusharound Lift
The ML256BH is our high-reaching model, designed to work comfortably at 31 feet. At this height, outriggers are required. Setup takes only about a minute. The outriggers are flush with the unit in the front and back, allowing users to get closer to work, compared to X pattern designs. Steel is used for column construction over aluminum for absolute minimum sway and pitch.